Float Tank
Open Top
Float Pools
Floataround MK1
Floataround MK2
Float Rooms
Float Cabin For Two
Complete Centres
The Big Question
Floataround MK2
Floataround MK2

Floataround MK2
We have developed and installed an all new design for the Floataround Mk2 with a new look and a fabulous curved glass shower enclosure.

The round float pool of 2.4 metres (8 feet) in diameter is the same. The integral curved glass shower cubicle is optional, but comes with the standard product. The floater enters through the double curved swing doors, showers and then enters the pool through a second set of double swing doors. This avoids the wet walk from shower to float tank, saves mopping time and is very convenient for the customer. The round pool is 280mm (11 inches) deep and big enough to stretch the arms and legs, so it is ideal for gentle floating exercise as well as really relaxing. The high ceiling and open design prevents any thoughts of claustrophobia, ideal for first time floaters. The walls are Röhm Plexiglas Satinice® 6mm acrylic in a range of colours.

Floatarounds obviously need a larger room than Floataway's other float tanks.

So this new product is aimed at commercial spas where its imposing design can be appreciated. Various lighting effects can also be employed to highlight its exterior appearance.

No external equipment is required apart from a remote control, which allows the lights and pump to be switched. A two way intercom can be added, and a sound source such as a CD player is required to send music to the 4 high tech acoustic transducers which send the sound into the water.


Height : 2250 mm
Foot print : 2450 x 3410 mm
Weight, unoccupied : 1800 kg
Capacity : 1200 litres
Tallest floater : 225cm (75”)
Power : 1750W- 230V (110V option)

Load Bearing Weight:

Water and salt - 1500Kg (15KN)
Product - 300Kg (3KN)
Standard person x2 - 200Kg (2KN)
Total weight - 2000Kg (20KN)
Load bearing foot print = 4.8m² = 416Kg/m² (4.16KN/m²)
Total product foot print = 5m² = 400Kg/m² (4KN/m²)

These are within the minimum standard for floor loading, but if the floor is questionable, we recommend you use a structural engineer to assess it and make recommendations for the loading given.

Obviously the temperature control is automatic and requires just less than one kilowatt in a normal temperature room. The shower is thermostatic and needs hot and cold water, we do not recommend the use of electric showers for commercial applications. Inside the Floataround the floater has control of the shower light and an alarm button. The internal light indicator is always lit at low level for safety.

The Shower Enclosure: The fabulous curved glass shower enclosure made for MK2.

Floataround without the Shower Enclosure: It is possible to request the Floataround Mk2 without the shower enclosure. Contact us for more information.
une réalisation vbdl-design